UKT Support logo

Home
What's New
Message Board
Contact Us

Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.


File Extensions
Humour
Links
Microsoft
Reference
Scanner Support





 


Advent 5611 Laptop

Note - There are two versions of this laptop, the only difference between them is the recovery software. The 5611B is supplied with recovery discs whereas with the 5611 you have to create your own.


Specification

CPUIntel Celeron Dual Core T1600 (1.66GHz)
BIOSPhoenix BIOS. Press F2 to enter
ChipsetIntel GL40 Express
Memory1GB DDR2 667MHz SODIMM (1 Memory Slot. Max 2GB)
Hard Drive160GB Toshiba MK1652GSX
CD DriveTSSTcorp CDDVDW TS-L633A ATA
Screen15.4" Widescreen TFT (1280x800)
Video CardIntegrated Intel GL40 Express Chipset Family
WebcamBuilt in
Sound CardRealtek High Definition Audio (7.1)
ModemNot installed ***
Network CardRealtek RTL8102E (Onboard)
Realtek RTL8187SE Wireless LAN **
Ports3x USB 2.0
1x Headphone
1x Microphone
1x 4-in-1 Card Reader (supports SD, MMC, MS, MS-Pro cards)
1x Kensington Lock
1x LAN
1x VGA
1x HDMI
1x eSATA *
BatteryU40-3S3700-B1Y1 (11.1v 3700mAh)
U40-3S4400-G1L3 (10.8v 4400mAh)
U40-4S2200-G1L3 (14.4v 2200mAh)
Dimensions34.65 x 255.5 x 358 (HxWxD in mm)
Weight2.7kg
ColourBlack
Made ByU51IL1

* The eSATA port also doubles up as a 4th USB port.

** The wireless is enabled on this laptop by pressing the function (Fn) key and F10 key at the same time. Note that the wireless needs to be turned on every time the computer is restarted.

*** While the case does have a modem port, it should be blocked off as the laptop doesn't have a 56k modem built-in.


Drivers

Your laptop should have been supplied with a Utility CD which contains a copy of the user manual and all the drivers. The Advent Computers website lists two lots of drivers for the 5611, one labelled as "Advent 5611 5612" and the other "Advent 5611B".


Memory Upgrades

This laptop has one memory slot which is accessed by removing the expansion panel underneath the laptop (see "Bottom of Laptop" section below).


Adding RAM is the most cost effective way to boost your computer's performance.


Bottom of Laptop

9115 underneath

Function Keys

Fn+F1 - Put the laptop into Suspend Mode
Fn+F2 - Enter Silent Mode
Fn+F3 - Mute/UnMute Sound
Fn+F4 - Change display mode - Laptop Screen/ External display/ Laptop and External display
Fn+F5 - Increase the speaker volume
Fn+F6 - Decrease speaker volume
Fn+F7 - Increase brightness
Fn+F8 - Decrease brightness
Fn+F9 - Enable/Disable touchpad
Fn+F10 - Enable/Disable Wireless
Fn+F11 - Enable/Disable Webcam


In the Box

Disks Supplied

  • Microsoft Works SE 9.0
  • Notebook drivers CD
  • Advent Recovery discs (5611B Only)

Items Supplied

  • Advent 5611 notebook
  • Mains power adapter
  • Mains power cable
  • Advent Welcome Pack

Documentation Supplied

  • Advent Setup Guide
  • Windows Vista Quick Start Guide
  • Advent Troubleshooting and Recovery Manual
  • Advent Safety & Regulations Manual
  • International Support numbers leaflet
  • Integrated Webcam addendum
  • Microsoft Office Home and Student 2007 60 day trial key and 10% off offer

Recovery Disc

Replacement recovery discs can be ordered from the Advent Recovery Media site.

Hard Drive Recovery

Should your Windows develop serious errors or fail to start, you can restore your computer back to factory settings by using the hard drive recovery located on a hidden partition on the hard drive.

To restore your computer back to factory settings, follow the steps below:

  1. Turn on the computer and keep tapping F8 until the advanced options menu is displayed
  2. Use the up/down arrow keys on the keyboard to highlight Repair Your Computer and press enter to select it
  3. Select the language you wish to install (normally English is the only option)
  4. Once you have chosen your language you will be presented with the available recovery options
    • Microsoft Repair Environment - after choosing the UK keyboard layout you will be asked to choose the Operating System you wish to repair. If Windows Vista is not listed then you cannot repair the OS without doing the full recovery. After choosing Vista the Microsoft Vista startup repair tool will run and attempt to repair any startup problems you are experiencing
    • Reinstall Windows - gives you the options available to reinstall Vista
    • Advanced Options - this launches the diagnostic centre allowing you to run chkdsk, launch notepad or bring up a command prompt
    • Exit & restart computer - Exits withut running the recovery process
  5. To continue with the recovery program you need to choose Reinstall Windows
  6. On the next screen you have the ability to launch Vista System Restore and roll back to a date when Vista was last working ok or to run the Full Destructive Recovery. To continue with the recovery program you need to choose Start Full Destructive Recovery
  7. After choosing the Full Destructive Recovery option you are presented with the warning screen that all data will be lost. It is important to make sure all data has been backed up to disk if possible and to realise this process deletes all data and reverts the machine back to it's default state. To continue with the recovery program you need to tick the box indicating you are aware of data loss
  8. The recovery process will then run through, the computer will restart a couple of times during this. You will also need to go through the Vista "Out of Box Experience", to configure Vista. This is fairly straightforward so just follow the onscreen instructions

Recovery DVD Creator

Note - This feature is not available on the 5611B

Your computer comes supplied with a hard drive based recovery allowing you to reinstall Windows Vista very easily should the need arise. You also have the ability to create a recovery DVD which is recommended on all machines. To create a recovery DVD (note - you cannot use CDs) do the following.

  1. Double click on the Techguys DVD icon on the desktop or from the start menu
  2. The first screen will prompt you to insert a DVD into your drive. Click OK.
  3. On the next screen make sure your DVD drive is selected in the 'To' field. To reduce the risk of errors ensure the write speed is set to the lowest value and tick verify recorded data. Click Burn
  4. Once the process has completed, label your DVD, keep it in a safe place and in a protective case to avoid damage

DVD Recovery

Should your Windows develop serious errors or fail to start, you can restore your computer back to factory settings by using the Recovery DVD you may have created or been sent.

To restore your computer back to factory settings, follow the steps below.

  1. Start the computer with the Recovery DVD in the optical disc drive
  2. After the usual startup screen has vanished press a key when prompted to load from the DVD
  3. Select the language you wish to install (normally English is the only option)
  4. Once you have chosen your language you will be presented with the available recovery options
    • Microsoft Repair Environment - after choosing the UK keyboard layout you will be asked to choose the Operating System you wish to repair. If Windows Vista is not listed then you cannot repair the OS without doing the full recovery. After choosing Vista the Microsoft Vista startup repair tool will run and attempt to repair any startup problems you are experiencing
    • Reinstall Windows - gives you the options available to reinstall Vista
    • Advanced Options - this launches the diagnostic centre allowing you to run chkdsk, launch notepad or bring up a command prompt
    • Exit & restart computer - Exits withut running the recovery process
  5. To continue with the recovery program you need to choose Reinstall Windows
  6. On the next screen you have the ability to launch Vista System Restore and roll back to a date when Vista was last working ok or to run the Full Destructive Recovery. To continue with the recovery program you need to choose Start Full Destructive Recovery
  7. After choosing the Full Destructive Recovery option you are presented with the warning screen that all data will be lost. It is important to make sure all data has been backed up to disk if possible and to realise this process deletes all data and reverts the machine back to it's default state. To continue with the recovery program you need to tick the box indicating you are aware of data loss
  8. The recovery process will then run through, reinstalling Vista and also recreating the hard drive recovery system for future use.
  9. When it has finished copying files it will ask you to remove the DVD and then restart the computer. It will then go through setting up Vista, you will need to go through the Vista "Out of Box Experience". This is fairly straightforward so just follow the onscreen instructions

Useful Links

Repairs and Spares

All official service and support is handled by Knowhow (basically "The Tech Guys" under a new name), their website is http://www.knowhow.com/. If you laptop is covered under warranty then you need to contact them for repairs.

There are also plenty of other companies that do repairs or supply spare parts, here is a selection -

TechnoMart - http://www.techno-mart.co.uk
Laptop Solutions UK - http://www.laptopsolutionsuk.co.uk
PartMaster (spare parts) - http://www.partmaster.co.uk