Canon BJ-130e Printer
General
Alternative Drivers 
Drivers you can use if the BJ-130e driver is not available. 
- IBM ProPrinter X24 (BJ Mode)
  
Cartridge 
Serial Number 
Location - Cream coloured label on the back of the printer Prefixes -  TAA, TAJ... 
 
Known Issues
Prints light in Windows, OK in DOS 
Set DIP switch 2-1 to High Density ON and switch 2-5 HQ OFF.  The switches are at the rear of the printer 
DIP Switches
BJ-130 XL24e Mode (Use this mode for Windows) 
Switch DSW1 | Function | ON | OFF | Factory Setting |  
| 1 | Buzzer | OFF | ON | OFF |  
| 2 | Zero Character | With Slash | NO Slash | OFF |  
| 3 | Auto Line Feed | CR with LF | CR only | OFF |  
| 4 | Page Length | 12 inch | OFF | OFF |  
| 5 | Auto Carriage Return | LF with CR | LF only | OFF |  
| 6 | Print Line Length | 8 inch | 13.6 inch | OFF |  
| 7 | Character Set | Set 2 | Set 1 | OFF |  
| 8 | Code Page Selection | 850 | USA (837) | OFF |  
 
Switch DSW2 | Function | ON | OFF | Factory Setting |  
| 1 | Graphics Image Density | High | Normal | OFF |  
| 2 | Interface | Serial (RS-232) | Parallel | OFF |  
| 3 | Auto-Sheet Feeder | OFF | ON | OFF |  
| 4 | Alternate Graphics Mode (AGM) | ON | OFF | OFF |  
| 5 | Print Quality | Draft | Normal | OFF |  
| 6 | Font | Gothic | Courier | OFF |  
| 7 | Receive Buffer | 6/60kb | 50/16kb | OFF |  
| 8 | Top / Bottom Margin | Invalid | Valid | OFF |  
 
Set DIP Switch 2-1 High Density ON for Windows Printing. 
 
 
 
 
 |