 Acer File Extensions |
Canon BJC-2000 Printer
General
Cartridges
- BC-20 - Black Ink
- BCI-21bk - Black Ink Tank (BC-21)
- BCI-21c - Tri Colour Ink (BC-21)
- BC-21e - Colour Print Head
- BC-29f - Fluorescent Ink & Integral Print Head
Self Test
To print a test page first switch the printer on then press the reset button twice. You can also print a test page via the Maintenance tab in your BJC-2000 printer driver.
Cleaning Print Head
To clean the print head first switch the printer on then press and hold down the reset button for 2 seconds. You can also run the head clean via the Maintenance tab in your BJC-2000 printer driver.
Serial Number
Location - Cream coloured label on the rear of the printer, centre back of sheet feed.
Known Issues
When an image is scanned, it prints 4 times bigger then the page
This happens when you are using PAINT to print from. Use the software that came with the scanner or use any graphical/Desk Top Publishing software.
Error Codes
The BJC-2000 does not beep or have any LEDs to indicate errors. All errors are reported via the computer with error messages.
| Error Condition | Error Indication on Computer | Error Code | Possible Solution |
|---|---|---|---|
| Paper Feed | The Printer is out of paper | Add Paper | |
| Paper Jam | A paper jam has occurred | Remove any paper jammed | |
| Cover is open | The printer's front cover is open | Close the front panel | |
| No cartridge | BJ Cartridge error occured | Install the BJ cartridge properly and close the printers front cover. | |
| Head Mismatch | An incorrect cartridge was installed in the printer. | Insure the scanner IS cartridge is installed when scanning or the BJ Cartridge is installed when printing | |
| Home Position | An error that possibly requires a service call has occurred | 5000 | Make sure no obstructions are blocking the cartridge movement, if not needs service. |
| Carriage Error | An error that possibly requires a service call has occurred | 5100 | Try unplugging the printer for 30 seconds, if not requires a service. |
| Head Temp Sensor Error | An error that possibly requires a service call has occurred | 5200 | Needs Service |
| Scanner IS-22 | An error that possibly requires a service call has occurred | 5210 | |
| Temperature Sensor | An error that possibly requires a service call has occurred | 5400 | Try unplugging the printer for 30 seconds, if not requires a service. |
| No Cartridge Error | An error that possibly requires a service call has occurred | 5600 | Try reinstalling Cartridge or replacing the cartridge |
| Cleaning Error | An error that possibly requires a service call has occurred | 5C00 | Make sure no obstructions are blocking the cartridge movement, if not needs service. |
| EEPROM | An error that possibly requires a service call has occurred | 6800 | Try unplugging the printer for 30 seconds, if not requires a service. |
| Waste Full | An error that possibly requires a service call has occurred | None | Needs Service |
Waste Error Reset
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.