Canon BJC-6100 Printer
Error Codes
| Error Condition | Indicator | BEEPS | Error Code | Possible Solution |
| Paper Feed/Delivery | Orange | 2 | | Remove any paper jammed |
| Paper Jam | Orange | 3 | | Remove any paper jammed |
| Ink Out | Orange | 4 | | Add Ink |
| BJ Cartridge Mismatch | Orange | 5 | | Re-install cartridge or replace it. See notes below for correct positions |
| NO BJ Cartridge | Orange | 6 | | Re-install cartridge or replace it |
| BJ Cartridge Error | Orange | 7 | | Re-install cartridge or replace it |
| Waste Full warning | Orange | 8 | | Waste is almost full, needs service very soon |
| Auto Head Adjustment Error | Orange | 9 | | Is there Black and Cyan ink ? AutoAlignment requires Black and Cyan inks. |
| ROM Error | 1 x Orange | 10 | | Try unplugging the printer for 30 seconds, if not requires service. |
| RAM Error | 2 x Orange | 10 | | Try unplugging the printer for 30 seconds, if not requires service. |
| EEPROM | 3 x Orange | 10 | 6800 | Try unplugging the printer for 30 seconds, if not requires service. |
| Home Position | 4 x Orange | 10 | 5100 | Make sure nothing is blocking the cartridge movement, if not requires service. |
| Temperature Sensor | 5 x Orange | 10 | 5400 | Try unplugging the printer for 30 seconds, if not requires service. |
| Waste Full | 6 x Orange | 10 | 5B00 | Needs Service |
| Cartridge OverHeat | 7 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
| Cartridge Overheat | 8 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
| Cartridge Displaced | 9 x Orange | 10 | 5600 | Replace the BJ Cartridge(Printhead) or reinstall |
| | None | None | 5910 | Needs Service |
| | None | None | 5C00 | Needs Service |
Waste Error Reset
1: Power off printer 2: Hold Resume button then press and hold POWER, the beeper will sound once. 3: Hold POWER and release RESUME 4: Press RESUME twice 5. Release Power button 6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange. 7: Press Power to set data
Notes - BJ Cartridge Mismatch
This error can be caused by installing the BJ Cartridges (Printheads) in the wrong position in the printer. The Correct combination are as follows
| Left Holder | Right Holder |
| BC-30 | BC-31 |
| BC-32 | BC-31 |
Insure the Cartridge lock levers are down. Reinstall both Cartridges.
|