 Acer File Extensions |
Canon BJC-6200 Printer
Error Codes
| Error Condition | Indicator | BEEPS | Error Code | Possible Solution |
|---|---|---|---|---|
| Paper Feed/Delivery | Orange | 2 | Remove any paper jammed | |
| Paper Jam | Orange | 3 | Remove any paper jammed | |
| Ink Out | Orange | 4 | Add Ink | |
| BJ Cartridge Mismatch | Orange | 5 | Re-install cartridge or replace it. See notes below for correct positions | |
| NO BJ Cartridge | Orange | 6 | Re-install cartridge or replace it | |
| BJ Cartridge Error | Orange | 7 | Re-install cartridge or replace it | |
| Waste Full warning | Orange | 8 | Waste is almost full, needs service very soon | |
| Auto Head Adjustment Error | Orange | 9 | Is there Black and Cyan ink ? AutoAlignment requires Black and Cyan inks. | |
| ROM Error | 1 x Orange | 10 | Try unplugging the printer for 30 seconds, if not requires service. | |
| RAM Error | 2 x Orange | 10 | Try unplugging the printer for 30 seconds, if not requires service. | |
| EEPROM | 3 x Orange | 10 | 6800 | Try unplugging the printer for 30 seconds, if not requires service. |
| Home Position | 4 x Orange | 10 | 5100 | Make sure nothing is blocking the cartridge movement, if not requires service. |
| Temperature Sensor | 5 x Orange | 10 | 5400 | Try unplugging the printer for 30 seconds, if not requires service. |
| Waste Full | 6 x Orange | 10 | 5B00 | Needs Service |
| Cartridge OverHeat | 7 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
| Cartridge Overheat | 8 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
| Cartridge Displaced | 9 x Orange | 10 | 5600 | Replace the BJ Cartridge(Printhead) or reinstall |
| None | None | 5910 | Needs Service | |
| None | None | 5C00 | Needs Service |
Notes - BJ Cartridge Mismatch
This error can be caused by installing the BJ Cartridges (Printheads) in the wrong position in the printer. The Correct combination are as follows
| Left Holder | Right Holder |
|---|---|
| BC-30 | BC-31 |
| BC-32 | BC-31 |
Insure the Cartridge lock levers are down. Reinstall both Cartridges.
Waste Error Reset
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data
Cleaning Print Head
- Power on your printer, press and hold the "RESUME" button until the printer light flashes once.
- When the printhead cleaning begins, the POWER light starts flashing. This will continue for about 30 seconds and clean all nozzles.
- Wait for the light to stop flashing before you resume normal operation.
- Perform the Nozzle Check Pattern test again, if the results are not satisfactory you may need to execute a printhead deep cleaning.
Note: You can also clean the printhead by clicking the Cleaning button in the Maintenance tab of the printer properties dialog box in Windows; or by clicking the Cleaning pull-down menu in the Printer Utilities dialog box on a Macintosh computer. Choosing this option will allow you to select all nozzles, black or just the colour nozzles.
Deep Cleaning Print Head
- Make sure the printer is turned on.
- Click Start, then Settings, then Printers. Note:Windows XP users: Click Start, select Control Panel, then Printers and Other Hardware, then Printers and Faxes.
- Right-click the Canon S820D Bubble Jet printer icon, then select Properties.
- Click the Maintenance tab, then click the Cleaning or Deep Cleaning button. The Maintenance tab and procedures may vary for Windows 2000 and Windows XP. Follow the instructions when prompted for those operating systems.
- For each message displayed, click OK. The BJ Status Monitor opens automatically and closes when the printhead cleaning is done. The POWER lamp on the printer flashes green during the cleaning process.