UKT Support logo

Home
What's New
Message Board
Contact Us


Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.

File Extensions
Humour
Links
Microsoft
Reference
Scanner Support





 


Packard Bell 100 M/Board

Specification

  • Battery : 3.6V DC NiCad soldered on motherboard
  • BIOS : 128 KB or 2 x 32KB - Phoenix BIOS Phoenix 3.10.1511. To access setup - Ctrl+Alt+S
  • Cache : N/A
  • Clock/Driver : (RTC)
  • Cover Removal : 2 screws on front under slide covers
  • CPU : 80286-12 MHz Keyboard Switches: (Ctrl)+(Alt)+(+) = 12 MHz (Ctrl)+(Alt)+(-) = 8 MHz 80287-8MHz (optional)
  • Drive Cavities : 1 X 5-1/4" half-height(exposed) 1 X 3-1/2" third-height(exposed) 1 X 3-1/2" half- height(enclosed)
  • I/O Expansion slots : 3x 16-bit ISA
  • Interfaces :
    • 1 DB-25 Parallel Port
    • 1 RS-232C, DB-9 Serial Port
    • 1 PS/2 Keyboard Port
    • 1 PS/2 Mouse Port
    • 1 15-pin VGA Port
    • 1 15-pin Game Port
  • Power Supply : 60 watts
  • RAM : Standard on motherboard: 1MB X 3-1/2 (soldered, 80ns) Maximum on motherboard : 3MB (use 1MB 8-bit SIMMs, 80ns)
  • Speaker : Piezoelectric soldered on motherboard
  • Video : Built-in, Oak Super VGA 256Kb not expandable 800 x 600 16 colour

Jumpers

JumperFunctionPinsDescription
JFDCBuilt in FDC1-2
2-3
* Enabled
Disabled
JHDCBuilt in IDE1-2
2-3
* Enabled
Disabled
JC13Modem Port1-2
2-3
* Select COM1
Select COM3
JC24Serial Port1-2
2-3
* Select COM2
Select COM4
JLPSLPT Port1-2
2-3
* Select LPT1
Select LPT2
JLRQLPT Interrupt1-2
2-3
* Select IRQ 7
Select IRQ 5
JVGASBuilt in VGA1-2
2-3
* Enabled
Disabled
JVRQVGA InterruptClosed
Open
* Use IRQ 9
Do not use IRQ 9
JVDDisplay ModeClosed
Open
* Colour
Monochrome
JMRQMouse InterruptClosed
Open
* Use IRQ 12
Do not use IRQ 12
JGAMSGame Port1-2
2-3
* Enabled
Disabled

* Default Values

Note - JMOD - Modem Connector. This is a 2 x 10 Pin Header. It has 2 settings. With the jumpers on Pins 9,10,11,12 - No daughterboard fax/modem installed. With the jumpers on Pins 9,10,11,12 removed - Daughterboard fax/modem not installed. A modem installed in an expansion slot WILL NOT WORK if jumper is removed.

Upgrades

  • Battery : This system uses a soldered Nicad battery. It is not changeable or replaceable.
  • Cache Memory : This system does not support cache memory.
  • Maths Co-Processor : A 80287-10 co-processor can be installed in socket U47, no jumpers need to be changed.
  • RAM : Standard on motherboard: 1MB X 3-1/2 (soldered, 80ns) Maximum on motherboard : 3MB (use 1MB 8-bit SIMMs, 80ns)
  • Speaker : The speaker is not changeable.
  • Video Memory : This system has 256k video memory soldered (not upgradeable).